|
|
HVac
Baldor's line of Heating, Ventilation, and Air Conditioning Motors are designed with dynamically balanced rotors for reduced vibration and quiet operation.
The motors range in size from 1/4 HP to 75 HP and include heavy-duty industrial designs as well as designs for commercial applications.
These applications include ventilators, direct drive and belted fans, exhaust fans, unit heaters, air conditioning units, and commercial refrigeration condensers.
Also included are motors designed especially for use with variable torque electronic controls that are used to conserve electricity.
|
|
|
Inverter Duty
Inverter Drive Motors are wound with 200 degree C moisture resistant ISR (Inverter Spike Resistant) magnet wire, which dramatically extends the life of the motors compared to motors wound with non-ISR wire.
The motors available from stock range in size from 1/3 HP to 500 HP. These motors are designed for applications where up to a 1000:1 constant torque speed range is required.
Applications include conveyors, pumps, fans, metal processing, compressors, test stands, and material handling equipment.
|
|
|
Metric
Baldor's line of Metric Dimension Motors are designed in IEC Frames from D63 through D200L.
The motors are available from stock in 50 Hz or 60 Hz. This means that replacement 60 Hz motors are readily available from Baldor to replace metric motors that have failed on imported machinery.
Motor construction meets IP54 and includes motors with B3 base mounting, B5 Flange mounting, or B14 Face mounting.
Stock motors range in size from .18 kW to 30 kW. Typical applications for this product include pumps, fans, conveyors, machine tools, gear reducers and any other jobs that requires IEC Frames.
|
|
|
Premium Efficient
Super-E Motors are designed to conserve energy over extended time periods.
These premium efficiency designs are available in both Totally Enclosed Fan Cooled and Open Drip Proof construction.
All three phase motors are Inverter Ready per NEMA Standard MG1, Part 31.4.4.2. This means the motors in 230 and 460 volts meet NEMA'a corona inception voltage requirements, under this Standard, and can withstand peak voltages of up to 1600 volts.
Motors having premium efficiency are also available in single phase designs.
|
|
|
Pressure Washer
These single phase motors are available in both totally enclosed fan cooled and open drip proof construction.
Built as industrial quality with 200 degree C., moisture resistant wire, the motors have UL and CSA recognized component approvals.
Nema frames sizes include 56 through 184 in rigid base only or NEMA C face with base.
|
|
|
Pump
Our pump line of motors includes single or three phase jet pump motors, square flange motors, close-coupled pump motors, and P-Base vertical solid shaft pump motors.
The motors are stocked in totally enclosed fan cooled, open drip proof, and many explosion proof ratings.
Applications for these run the gamut from swimming pool pumps to medium and high thrust in-line pumps used in water treatment plants.
Horse powers range in size from 1/3 through 75 HP.
|
|
|
Servo
Baldor's servo line includes both brushless and brush type motors. Designs are available having either ferrite or rare earth magnets.
Numerous ratings are stocked and are available with Baldor controls for Matched Performance. These motors are ideal for industrial applications where high torque to inertia ratio and repeatability are needed.
These applications include material handling, X-Y positioning, machine tools, factory automation, and packaging equipment.
|
|
|
Two-Speed
Two Speed Motors are available in both totally enclosed fan cooled and open drip proof designs.
Constant torque or variable torque motors having one winding or two winding are stocked in NEMA frames 56 through 284T.
Applications for these motors include fans, blowers, pumps, machine tools, hoists and conveyors.
|
|
|
Vector
Vector Drive Motors are stocked in either totally enclosed blower cooled with an attached constant velocity fan or totally enclosed non-ventilated construction.
All motors are supplied with a 1024-line count encoder. Horse powers are available from 1 through 500 HP in NEMA frame sizes from 56C through 5009L.
The motors are ideal in industrial applications where full torque is needed from base speed down to zero speed.
Applications include test stands, material handling, packaging equipment, printing presses, and others requiring exact speeds and positioning.
|
|
|
Washdown
Baldor's Washdown Duty Motors are available from stock in single and three phase AC and in DC designs.
Horse powers range from 1/2 to 20 HP. Designs include motors having an electostatically applied epoxy finish, paint free having major components of the motor in 300 stainless steel, and all stainless steel.
Applications include food processing, packaging, pharmaceuticals, or applications where motors are regularly exposed to high pressure wash down.
| |
